HOME >> Progress in Energy & Fuels

About This Journal

Progress in Energy & Fuels is an academic journals track new energy hotspots and reflect the latest research results, mainly covering international new and renewable energy sources, including solar energy, biomass energy, wind energy, ocean energy, geothermal energy, natural gas hydrates and other fields. Science and technology and renewable energy, integration of complementary and related supporting technologies, the latest progress and research results.

This publication publishes international scientific and technological advances on new and renewable energy sources, including solar energy, biomass energy, wind energy, hydrogen energy, ocean energy, geothermal energy, natural gas hydrates, energy storage, and low-carbon energy. The research results are in the form of reviews, research papers, and research briefs. The manuscript should be clear-cut in point of view, full of arguments, reliable data, clear-cut levels, and liberal arts and sciences.


ISSN(P): 2251-2640
ISSN(O): 2315-4640


Editorial Board

Click here to see the editorial board.

Focus and Scope

The Progress in Energy & Fuels academic journals track new energy hotspots and reflect the latest research results, mainly covering international new and renewable energy sources, including solar energy, biomass energy, wind energy, ocean energy, geothermal energy, natural gas hydrates and other fields. Science and technology and renewable energy, integration of complementary and related supporting technologies, the latest progress and research results.

This publication publishes international scientific and technological advances on new and renewable energy sources, including solar energy, biomass energy, wind energy, hydrogen energy, ocean energy, geothermal energy, natural gas hydrates, energy storage, and low-carbon energy. The research results are in the form of reviews, research papers, and research briefs. The manuscript should be clear-cut in point of view, full of arguments, reliable data, clear-cut levels, and liberal arts and sciences.

 

For Authors

  • The journal will not accept manuscript that has been published or is under consideration for publication in any other journal. The author needs to notify the journal if the data presented in the manuscript has been ever presented in conferences.
  • The author has to provide the authorization of no conflict of interest with any financial body or funding agency that might influence the results or interpretation of their manuscript. All authors, members, reviewers and editors must disclose any association that poses a conflict of interest in connection with the manuscript. The corresponding author must download and complete the ICMJE Conflict of Interest Form on behalf of all the authors regarding to potential conflicts of interest, and submit the form in Step 4 during the article submission process.
  • All articles should be written in English—either British or American as long as consistency is observed. SI units should be used. If you are not a native speaker of English you may want to utilize the professional language editing service provided by us before submitting the final version.
  • If you decide to withdrawal your manuscript after it has been accepted (but not yet published), a processing fee of USD 200 is chargeable upon withdrawal.
  • The journal will not accept manuscripts that are plagiarized in any circumstances. The journal will verify the originality of the submitted manuscripts with iThenticate, the plagiarism detection software.

    If a manuscript uses a text copied directly from another source, this text must be written in quotation marks and original source must be cited. If any kind of plagiarism is detected during the review process, the manuscript will be rejected.

    Authors and researchers can also use iThenticate to screen their work before submission by visiting http://www.ithenticate.com.

  • PiscoMed Publishing requests all members involved in the journal publishing process to adhere the “Code of Conduct for Editors” and “Code of Conduct for Publishers” as stipulated by COPE (Committee on Publication Ethics). The guidelines define the best practice in the ethics of scholarly publishing, aiding the journals and publishers to achieve this.
  • Units of measurement should be presented simply and concisely using System International (SI) units.
  • Cover Letter
    The cover letter is necessary for each submission. The cover letter should be uploaded as a separate file in Step 4 during the submission. The contents of the cover letter should include brief explanation of what was previously known, the conceptual advancement with the findings and its significance to broad readership. The cover letter will only be visible to the editor. Reviewers will not have access to the cover letter.

    Title
    The title should capture the conceptual significance for a broad audience. The title should not be more than 50 words and should be able to give readers an overall view of the paper’s significance. Titles should avoid using uncommon jargons, abbreviations and punctuations.

    Abstract
    The abstract should provide a brief summary of the paper. It should not contain any non-standard abbreviations, acknowledgements of support, references, footnotes or equations. The abstract should not exceed 200 words.

    Keywords
    Three to six keywords should be provided.

    Introduction
    The introduction section should provide a context or background that gives a broad readership an overall outlook of the field and the research performed. It tackles a problem and states its important regarding with the significance of the study. Introduction can conclude with a brief statement of the aim of the work and a comment about whether that aim was achieved.

    Materials and Methods
    The materials and methods section provides the general experimental design and methodologies used. The aim is to provide enough detail to for other investigators to fully replicate your results. It is also required to facilitate better understanding of the results obtained. Protocols and procedures for new methods must be included in detail to reproduce the experiments.

    Ethics
    Ethics information, including IACUC permit numbers and/or IRB name, if applicable. This information should be included in a subheading labeled "Ethics Statement" in the "Methods" section of your manuscript file, in as much detail as possible.

    Results
    The result section focuses on the results of the experiments performed. This section can be divided into subsections.

    Discussion and Conclusion
    The discussion and conclusion section should provide the significance of the results and identify the impact of the research in a broader context. It should not be redundant or similar to the content of the results section. Use the conclusion section for interpretation only, and not to summarize information already presented in the text or abstract.

    Author Contributions
    The author contributions section describes the contribution of each author, designated by initials. For the case of co-first authors, description of each author’s contribution is required.

    Acknowledgements
    The acknowledgements section should acknowledge contribution(s) from non-authors and funding sources. It should also include a declaration of any conflict of interest.

    Supplementary Information
    The supplementary information section is optional and contains all materials and figures that have been excluded from the entire manuscript. The information is relevant to the manuscript but remains non-essential to readers’ understanding of the manuscript’s main content. All supplementary information should be submitted as a separate file in Step 4 during manuscript submission. Please ensure the file names of such files start with ‘Suppl_info_’.

    Text
    The text of the manuscript should be in Microsoft Word. The length of the manuscript cannot be more than 8000 words.

    In-text citations
    Reference citations in the text should be numbered consecutively in square brackets. Some examples:

    1. Negotiation research spans many disciplines [3,4].
    2. This result was later contradicted by Becker and Seligman [5].
    3. This effect has been widely studied [1–3,7].

    Personal communications and unpublished works can only be used in the main text of the submission and are not to be placed in the Reference section. Authors are advised to limit such usage to the minimum. They should also be easily identifiable by stating the authors and year of such unpublished works or personal communications and the word ‘Unpublished’ in parenthesis. E.g. (Smith J, 2000, Unpublished)

    References
    The references section is compulsory and should be placed at the end of all manuscripts. The list of references should only include works that are cited in the text and that have been published or accepted for publication. Personal communications and unpublished works should be excluded from this section.

    The journal follows the Vancouver style of references. You can refer to the ICMJE Recommendation for preparing your references in the manuscript for submission. For references in the reference list, if the referred article has more than five authors, list only the first five authors and abbreviate the remaining authors to italicized ‘et al.’ (meaning: "and others"). Authors referenced are listed with their surname followed by their initials (e.g. Smith J). All references should be numbered (e.g. 1. 2. 3. etc.) and sequenced according to the order it appears as an in-text citation. References should follow the following pattern:

    • Journal article
      Terauchi Y, Takamoto I, Kubota N, Matsui J, Suzuki R, et al. Glucokinase and IRS-2 are required for compensatory beta cell hyperplasia in response to high-fat diet-induced insulin resistance. J Clin Invest 2007; 117(1): 246–57. doi: 10.1172/JCI17645.
    • Non-English journal article
      Massone L, Borghi S, Pestarino A, Piccini R, Gambini C. Localisations palmaires purpuriques de la dermatite herpetiforme (French) [Purpuric palmar sites of dermatitis herpetiformis]. Ann Dermatol Venerol 1987; 114(12): 1545–1547.
    • Book
      Rojko JL, Hardy WD Jr. Feline leukemia virus and other retroviruses. In: Sherding RG (editors). The cat: diseases and clinical management. New York: Churchill Livingstone; 1989. p. 229–332.
    • Proceedings
      Sasaki Y, Nomura Y (editors). Symposium on Nasal Polyp; 1984 Oct 5–6; Tokyo. Stockholm: Almqvist & Wiksell; 1986. p. 48.
    • Dissertations
      Jones DL. The role of physical activity on the need for revision total knee arthroplasty in individuals with osteoarthritis of the knee [PhD thesis]. Pittsburgh (PA): University of Pittsburgh; 2001. p. 436.
    • Patents
      Blanco EE, Meade JC, Richards WD (inventors). Ophthalmic V (assignee). Surgical Stapling system. US patent. 4,969,591. 1990 Nov 13.
    • Websites
      Hypertension, Dialysis & Clinical Nephrology [Internet]. Hinsdale (IL): Medtext, Inc.; 1995–2001 [cited 2001 Mar 8]. Available from: http://www.medtext.com/hdcn.htm.

    Tables, Lists and Equations
    Tables created using Microsoft Word table function are preferred. The tables should include a title. Titles and footnotes/legends should be concise. These must be submitted together with the manuscript. Likewise, lists and equations should be properly aligned and its meaning clear to readers.

    Figures
    Figures include photographs, scanned images, graphs, charts and schematic diagrams. Figures submitted should avoid unnecessary decorative effects (e.g. 3D graphs) as well as be minimally processed (e.g. changes in brightness and contrast applied uniformly for the entire figure). It should also be set against a white background. Please remember to label all figures (e.g. axis etc.) and add in captions (outside the figure) as required. All figures must have a brief title (also known as caption) that describes the entire figure without citing specific panels, followed by a legend defined as description of each panel.

    The preferred file formats are TIFF and JPEG. All figures should be legible in print form and of optimal resolution. Optimal resolutions preferred are 300 dots per inch for RBG colored, 600 dots per inch for greyscale and 1200 dots per inch for line art. Although there are no file size limitation imposed, authors are highly encouraged to compress their figures to an ideal size without unduly affecting legibility and resolution of figures. This will also speed up the process of uploading in the submission system.

    The Editor-in-Chief and Publisher reserve the right to request from author(s) the high-resolution files and unprocessed data and metadata files should the need arise at any point after manuscript submission for reasons such as production, evaluation or other purposes. The file name should allow for ease in identifying the associated manuscript submitted.

  • Authors contributing to the journal agree to publish their articles under the Creative Commons Attribution-Noncommercial 4.0 International License, allowing third parties to share their work (copy, distribute, transmit) and to adapt it, under the condition that the authors are given credit, that the work is not used for commercial purposes, and that in the event of reuse or distribution, the terms of this license are made clear.

  • The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

Article Processing Charges (APC)

PiscoMed publishes all its journals in Gold Open Access format. The scientific community and the general public have free of all restrictions on accessing (e.g., subscription) and free of many restrictions on using its contents as soon as it is published online. PiscoMed does not require readers to purchase any form of subscription to view online versions of the journals. In order to defray our editorial and production costs, authors of the accepted articles are required to pay the article processing charges (APCs). The charges will come from authors' institutes or research funding bodies.

The APC for Progress in Energy & Fuels is as follows:

JournalAPC
Progress in Energy & FuelsUS $800

APC Payment

Payments for APC of this journal can be made through our online PayPal payment gateway. Enter the article no. into the below textbox and select "Pay Now" to proceed with payment.

*Article No.

*Article No. is mandatory for payment and it can be found on the acceptance letter issued by the Editorial Office. Payment without indicating Article No. will result in processing problem and delay in article processing. Please note that payments will be processed in USD. You can make payment through Masters, Visa or UnionPay card.




Announcements

News: 'Electrogeochemistry' captures carbon, produces fuel, offsets ocean acidification

Limiting global warming to 2 degrees Celsius will require not only reducing emissions of carbon dioxide, but also active removal of carbon dioxide from the atmosphere. This conclusion from the Intergovernmental Panel on Climate Change has prompted heightened interest in "negative emissions technologies."

A new study published June 25 in Nature Climate Change evaluates the potential for recently described methods that capture carbon dioxide from the atmosphere through an "electrogeochemical" process that also generates hydrogen gas for use as fuel and creates by-products that can help counteract ocean acidification.

First author Greg Rau, a researcher in the Institute of Marine Sciences at UC Santa Cruz and visiting scientist at Lawrence Livermore National Laboratory, said this technology significantly expands the options for negative emissions energy production.

 
Posted: 2018-09-12
 

News: Novel hybrid catalyst to split water discovered

Researchers from the University of Houston and the California Institute of Technology have reported an inexpensive hybrid catalyst capable of splitting water to produce hydrogen, suitable for large-scale commercialization.

Most systems to split water into its components -- hydrogen and oxygen -- require two catalysts, one to spur a reaction to separate the hydrogen and a second to produce oxygen. The new catalyst, made of iron and dinickel phosphides on commercially available nickel foam, performs both functions.

Researchers said it has the potential to dramatically lower the amount of energy required to produce hydrogen from water while generating a high current density, a measure of hydrogen production. Lower energy requirements means the hydrogen could be produced at a lower cost.

 
Posted: 2018-09-12
 

News: Energy Fuels Announces Q1-2018 Results

DENVERMay 3, 2018 /CNW/ - Energy Fuels Inc. (NYSE MKT:UUUU; TSX:EFR) ("Energy Fuels" or the "Company"), today reported its financial results for the quarter ended March 31, 2018. The Company's quarterly report on Form 10-Q has been filed with the U.S. Securities and Exchange Commission ("SEC"), and may be viewed on the Electronic Document Gathering and Retrieval System ("EDGAR") at www.sec.gov/edgar.shtml, on the System for Electronic Document Analysis and Retrieval ("SEDAR") at www.sedar.com, and on the Company's website at www.energyfuels.com. Unless noted otherwise, all dollar amounts are in U.S. dollars.  
Posted: 2018-09-12
 
More Announcements...


  Online First

Online First, the immediate online pre-published of all accepted papers. Articles in Online First are these have been initially reviewed, initially accepted and initially typeset. But they haven’t being peer-viewed and proofreaded, also, the final date of publication hasn’t been scheduled. Individual articles and its content may differ from the final version of publication, subject to the final version.

Table of Contents

Articles

Sunil Kumar, Shobhit Srivastava
PDF
Ramachandra Naik
PDF
amin ahmadi
PDF
Kiran Singh
PDF
Theresa Egbuchunam
PDF
Qian Xu
PDF
Abdeen Mustafa Omer
PDF
Bahtiyar DURSUN
PDF