Preparation and mechanical properties of particle-reinforced alumi-num matrix composites
Abstract
briefly introduces the classification and development of metal matrix composites , and focuses on several common preparation methods of particulate reinforced aluminum matrix composites , includes stirring casting , Squeeze casting , Liquid metal infiltration , powder Metallurgy , jet deposition and newer in-situ reaction compounding method ; also reviews particle reinforced aluminum base Research progress on mechanical properties of composites , including experimental progress ,theoretical model and simulation progress ; Finally, the development direction of particle reinforced aluminum matrix composites is prospectedReferences
Chuizhong , Wu Zhihong. . New developments in foreign aerospace materials [J]. Aerospace material Process , 1997, 4:5-13.
Song Wei . Development and application of metal matrix composites J]. Foundry Equipment Research , 5:48-50.
Wu Jinbo . Development and status of aluminum matrix composites J]. materials Science and engineering , 1992, 1:6-12.
Zhu Jinsheng, Wang Zhuo, Oupen . Application of advanced composite materials in the aerospace industry J ]. New technology new procedures ,(9): 76-79
Chi Jie . Research progress of boron fiber reinforced aluminum matrix composites J]. Shanghai Metal , 2009 (6): 47-51.
Li Xia , Chen Kanhua , Huang . effects of enhanced particulate on the strength of particulate reinforced aluminum matrix composites ring [J]. Aluminum Processing , 2006 (2): 9-13.
Ranjeche , Ma Liqun , Pan Anxia , , and so on . Powder Metallurgy method SiCp/mg Mechanics of matrix compo-sites Performance and damping performance research J].Light alloy machining technology , , (2): 50-54.
Nanhongjiang , Sam , Wang Wuxiao, etc. . Study on the preparation process of particulate reinforced magnesium matrix composites Progress [J]. Foundry Technology ,2006, 4:404-407.
Shodehong , Song , Chen Kanhua . current status and prospect of in-situ synthesis of titanium matrix compo-sites by [J]. material leader , 2007, (4): 65-68.
Zhang , Ludong , Wu Zhiming . Preparation and response of sic particle reinforced aluminum matrix composites research [J]. New technology and technology , : 60-62.
Chen Qiuling, Sun Yan. Study on particle reinforced aluminum matrix composites [J]. China resource synthesis with ,2003 (6): 31-33.
JEROME P. Commercial success for MMCs [J]. Powder Metallurgy, 1998, (1): 25-26.
Zhou Haili , Zhang Hongli , Huben . application of aluminum matrix composites in inertial navigation instru-ments analysis [J]. Aerospace material Process , 2001 , 9 (2): 70-74.
Sajjadi S A, ezatpour H R ,beygi H. Microstructure and mechanical properties of Al-al 2 0 3 Micro and nano composites fabricated by stir casting [J]. MaterialsScience andEngineering A,, 528 (29-30): 8765-8771.
Wang Wenming, Pan, LU Y , etc . Stirring Casting preparation sicp/al Research on composites now like [J]. Light alloy machining technology , , 4:1-35.
Zhao Longzhi , Yang . Study on particle reinforced aluminum matrix composites [J]. hot-machining process , , : 107-110.
vijayaram T R ,SULAIMAN S ,hamouda A M S ,et al. Fabrication of fiber reinforced metal matrix composites by Squeeze casting technology [J]. Journal of materials processing Technology, 2006, 178 (1-3): 34-38.
Cang , Cheng , Li can , , and so on . Sicp/al tensile properties of composites [J]. Composite Journal of Materials, 2009 , 4:83-88.
Copyright (c) 2018 Shi yang
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright on any open access article in a journal published by PiscoMed Publishing is retained by the author(s).
Authors grant PiscoMed Publishing a license to publish, copy, distribute, and convey the article.
The current adopted license, the Creative Commons Attribution 4.0 International License (CC BY 4.0), formalizes these and other terms and conditions of publishing articles. The license (CC BY 4.0) means:
Share: Everyone can copy and redistribute the open-access content in the journal.
Adapt: Materials in the articles can be remixed, reused, and reanalyzed for any purpose.
Attribution: You must cite the source with the correct license if some changes to the materials are made, but that does not mean that the licensor endorses you or your use.
Authors should ensure that the content of the article is not involved in a copyright dispute before submitting it. For previously published articles, authors should obtain permission from the copyright holder if the material is under a more restrictive license.
