Influence of graphene oxide on mechanical properties
Abstract
The coupling agent modified graphene oxide (go) is added into phenolic resin to prepare basalt fabric</b 12>
Reinforced phenolic composites. The influence of graphene oxide mass fraction on the mechanical and impact properties of basalt fabric reinforced Phenoli C Composites was investigated. The results show, the addition of Go in
creases The flexural strength , The modulus and Interlaminar strength (LSS) of the basalt fabric reinforced phenolic. The maximum flexural strength and modulus areobtained at the go mass fraction of 2WT%<b 14>, which s M
creased by nearly 39% and % , respectively. The Maximu mimpact load and damage absorbed energy increase by 40% and /b17>60%,respectively, after adding 1wt% go.References
Natali M , KENNY J , TORRE L. Phenolic matrix nanocomposites based on commercial grade Resols : synthesis and characterization [J]. CompositesScience and Technology, , 70 â‘·:571-577.
Garima M , VIVEK D , Rhee K Y , et al. A Review on carbon nanotubes and graphene as fillers in reinforced poly-mer]. Journal of Industrial and Engineering chemistry,2015 , (1) : 11-25.
Zhang Wenwen , Liu Xiujun , Lee same as , , and so on . Graphite oxide / polymer composites Research Progress [J]. New chemical materials , 2015, 43 (1): 12-14. Ziiang w,LIU X " J ,LIT Q,et al. Progress on graphene ox-ide/polymer composites [J]. New Chemical Materials,2015, 1:12-14 (in Chinese).
Li wei , Zhou Paoquan , Li Chenghui , , and so on . Graphene modified thermosetting resins and their fibres Re-search progress of dimensional composites [J]. FRP /Composite , 2014:96-101.
LI W , Ziiou B Q , LIZ H , et al. Progress of modifica tion of thermosetting resins and their fiber composites by U¬31>sing Grapheme[j]. Fiber reinforced Plastic Composites,2014 (one): 96-101 (in Chinese).
Ye , Yanyi , Cao Hai Lin . Graphene modified basalt fiber and its Enhancing performance of epoxy resin composites [J]. Journal of Composite Materials , 2014, 6:1402-1408.
YE G R , YAN Y W , CAO H L. Basalt fiber modified with graphene oxide and properties of its reinforced epoxy- com-pos]. Acta materiae Compositae sinica, 2014, (6): 1402-1408 (inchinese)
Shing , Forest Handspike , Yang You , , and so on . cyanate ester resin / Graphene oxide Preparation and characteri-zation of composites [J]. Polymer materials science and engineering , , 3:134-136.
JIANG Y M , LIN Q L , Yang YJ , et al. Preparation and characterization of cyanate esterresin/grapheneoxide nano-composites [J] Polymer Materi ALS Science & Engineering, , (3): 134-136 (Inchinese).
CAI D YJINJ, Yusoh K , et al. performance PolyU- rethane/functionalized grapheme nanocomposites with Improved mechanical and thermal properties [J]. CompositesScience and Technology,,, 6:702-707.
Hu Xianch. . application of continuous basalt fiber in military and civilian fields []. High-tech technology Fiber with application ,, 6:7-13.
HU X Q. The application of the CBF in war industry & civil ields[j]. iti-techfiber& application,% $, 6:7-13 (inchinese)
Hu Xianch . China should vigorously develop pure natural continuous basalt fiber ( CBF)[]. new material industry , 2006 (6): 65-70.
HU X Q. Should strive to develop natural continuous basalt fiber (CBF) [J]. Advanced materials Industry, 2006 (6): 65-70 (in Chinese).
Xu Xiaofang , Shen Shijie , Liu Yalan , , and so on . Basalt fiber reinforced epoxy resin complex Composite mate-rial mechanism []. Journal of Composite Materials , , 4:99-106.
XU XF , SHENSJ , LIU Y L , et al mechanism of basalt Ii- ber reinforced epoxy [J]. Acta materiae Compositae sinica,
, (4): 99-106 (Inchinese).
Zhang Junhua , Li Jinwen , Li Chun , , and so on . continuous basalt fiber plain cloth enhanced boron phenolic resin composite Research []. Engineering Plastics application , 2008 : 17-19.
ZHANG JH , LI JW , LIC X , et al on CBF resin- forced born-phenolic resin composites [J]. ¬Engineering Plas tics appli-cation,2008 , : 17-19 (in Chinese).
Lee wants , Cheng . The ablation performance of basalt fiber reinforced phenolic resin composites review []. Ma-terial Development and application , 2009, 5:36-39.
LI X , CHENG G Y. Ablation performance of basalt fiber re inforced phenolic resin composite [J].¬ Development and Ap- plicationof materials,2009 , 5:36-39 (Inchinese).
American Society for Testing and materials. Standard test method for high speed puncture properties of plastics using load and displacement: ASTM D 3763 [S] US:ASTM International, 2015
METIN S , Numan B , ONUR S. An experimental inves tigation on the impact behavior of hybrid composite plates [J].¬ Compositestructures,, (5 ): 1256-1262.
Copyright (c) 2018 yiwu Yan
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright on any open access article in a journal published by PiscoMed Publishing is retained by the author(s).
Authors grant PiscoMed Publishing a license to publish, copy, distribute, and convey the article.
The current adopted license, the Creative Commons Attribution 4.0 International License (CC BY 4.0), formalizes these and other terms and conditions of publishing articles. The license (CC BY 4.0) means:
Share: Everyone can copy and redistribute the open-access content in the journal.
Adapt: Materials in the articles can be remixed, reused, and reanalyzed for any purpose.
Attribution: You must cite the source with the correct license if some changes to the materials are made, but that does not mean that the licensor endorses you or your use.
Authors should ensure that the content of the article is not involved in a copyright dispute before submitting it. For previously published articles, authors should obtain permission from the copyright holder if the material is under a more restrictive license.
